What's New


Ensinger Offers Extruded Plastic Sheet in Pre-Cut Strips

Ensinger has developed a way to deliver any material they extrude in pre-cut strips of various thickness and width. Strips are slit from standard 2 x 4 foot sheets using a modified slitter. This method of pre-cutting to get a sheet into strip form as is often needed in the first step to a stamping or machining operation has proven to be very inexpensive if more than 50 to 100 sheets are needed for the job. Any Ensinger extruded material up to .156 thick and 2 feet wide can be handled. One recent order was for 50 foot long nylon strips that were .156 thick by .75 wide. Since there is setup time involved to prepare the modified slitter to handle slitting sheets, costs are dependent on number of cuts and volume being run. Factory quotations are available upon request.

« Back to listing